The Death Penalty Should Be Legal - 1224 Words

What is the death penalty? The death penalty is the punishment of execution, given to someone that was legally convicted of a crime. Why is the death penalty so efficient? The death penalty is efficient to me because it allows the prisons to open more space for new prisoners. I believe that the death penalty should be what happens to the convicted criminals of heinous crimes like rape and molestation, and murder and other crimes like kidnapping, child abuse. I believe this because it will rid the world of some crazy, dangerous people. It will also give the families of the victims and the victims closure. Crimes like burglary, theft, tax evasion, drugs, fighting (assault with no serious injuries) should not receive the death penalty,†¦show more content†¦quot;If we execute murderers and there is in fact no deterrent effect, we have killed a bunch of murderers. If we fail to execute murderers, and doing so would in fact have deterred other murders, we have allowed the killing of a bunch of innocent victims. I would much rather risk the former. This, to me, is not a tough call.quot; John McAdams - Marquette University/Department of Political Science, on deterrence (Hall, 2015). I truly do believe in this because if they are sick enough to hurt somebody so badly that they are mentally, and possibly physically messed up for their whole life then this is what they deserve. Some women are so embarrassed and ashamed of their sexual assault that they don’t even tell anybody what happened until years later if then. The United States of America is not even the highest ranked on the list of numbers of executions. The U.S. is ranked fifth, falling in line behind China, Iran, Iraq and Saudi Arabia (National Geographic, 2013). Many people believe in the death penalty including our president. Donald Trump said this on an appearance of his with Fox News quot;The death penalty. It should be brought back and it should be brought back strong... They say it#39;s not a deterrent. Well, you know what, maybe it#39;s not a deterrent but these two men convicted of killing two police officers in Hattiesburg, MS will not do any more killing. That#39;s for sure.quot; (ProCon.org, 2017). EvenShow MoreRelatedThe Death Penalty Should Be Legal1457 Words   |  6 PagesThe death penalty can be traced all the way to biblical times when people were executed for many reasons such as: for not believing in their god(s), choosing to interact in sexual conduct while unmarried, stealing, murder, etc. The methods of execution back in those times were to either: stone, hang, slay, crucify, and burn not only the offender who committed the crime, but if he or she had a family, the entire family was executed with them as a warning to the people of their tribe or city to notRead MoreThe Death Penalty Should Not Be Legal1261 Words   |  6 PagesThe Death Penalty Should Not Be Legal The death penalty should not be legal because of two major reasonings. These reasons are, the death penalty takes the lives of many innocent people, and it also costs too much. The death penalty should not be legal because innocent people are wrongly convicted and killed. According to the Death Penalty Information Center, it puts innocent lives at risk. At least 4.1% of all defendants sentenced to death in the United States in the modern era are innocent (DeathRead MoreThe Death Penalty Should Not Be Legal1004 Words   |  5 Pagesabolish death penalty† (Bosman). In thirty-one states, federal government and military legal system, the death penalty is lawful. Even the Supreme Court has been changed direction of capital punishment. One day, it could be a legal and illegal by the Supreme Court. Most of European countries ban the death penalty except Belarus that if a criminal involve international terrorism, murdered, inhumane crime and the criminal receives death penalty. Nowadays, banned the death penalty becomeRead MoreShould The Death Penalty Be Legal?985 Words   |  4 PagesBen Goble Mr. Newman English Comp. November 4, 2015 Should the Death Penalty be Legal? The death penalty, also called capital punishment, has been a topic of debate among the public for many years, gaining very little ground in changing the legality of it one way or the other. The topic is very controversial because many people feel that it is wrong to take the life of another person. On the other hand a very comparable number of people push for the legality of capital punishment for condemningRead MoreDeath Penalty Should Be Legal943 Words   |  4 PagesDo you think that death penalty will give justice for the innocent lives? The death penalty continues to be an issue of controversy in the whole world because people have different beliefs for giving justice to the innocents. For some people, they want it legal because death penalty will give justice for the innocent victims and a form of vengeance to the criminals. On the flipside, other people don’t agree with it because a lot of innocents are putting into death. These people believe that it isRead MoreThe D eath Penalty Should Not Be Legal1573 Words   |  7 PagesThere are many legal issues that come along with the death penalty. Ratified on December 15, 1791, The United States Bill of Rights states in its eight amendment, â€Å"Excessive bail shall not be required, nor excessive fines imposed, nor cruel and unusual punishments inflicted.† (8th Amendment to the Constitution). The Supreme Court stated during the 1958 case of Trop v. Dulles, that the 8th amendment must draw its meaning from the evolving standards of decency that mark the progress of a maturingRead MoreThe Death Penalty Should Be Legal1555 Words   |  7 Pageshave on a person? The death penalty, or capital punishment, is one of the most debated topics in America. It has been used for centuries, but many claim it to be barbaric, and want the practice to end all together. The death penalty should only be used in cases where there is absolute evidence that the criminal is guilty, because life in prison can be an alternative, there are many flaws in the justice system, and it can be a cruel and unusual punishment. The death penalty is legal in 32 states, theRead MoreThe Death Penalty Should Be Legal1554 Words   |  7 Pagesreceive the death penalty. Some say it is what they deserve, while others say that it is a â€Å"cruel and unusual†punishment. States, such as New Jersey, have already banned the penalty, but some states are still pending on whether to have the penalty or to follow New Jersey’s path . If you were to go and ask people why they are against the death penalty, they would say it is because it goes against morality, constitutionality, and the irrevocable mistakes of putting the wrong person to death. WhenRead MoreThe Death Penalty Should Not Be Legal1553 Words   |  7 Pagescalled problems with our system of justice is the death penalty. Capital punishment in this country seems to have its pros and cons. There are more issues and complications with being sentenced to death, while the positives are minuscule. The death penalty should not be allowed in the United States, and there are many reasons for this argument. The death penalty has caused controversy in the country since it became popular. 31 states use the death penalty and is also used by the military. Its use isRead MoreThe Death Penalty Should Be Legal Essay2884 Words   |  12 Pagesis the death penalty - should it be legalized across the 50 states or be declared unconstitutional? Some believe the death penalty is a better option for those who deserve the highest form of punishment available. However, others argue capital punishment is a waste of resources and should be brought to an end. Therefore, while many believe the death penalty should be legalized throughout the United States because it offers a higher form of punishment, others believe the death penalty should be repealed

The Usage Of A Bandgap Reference Voltage Engineering Essay Free Essays

A bandgap mention electromotive force is an indispensable constituent of an parallel to digital converter.It is frequently used to provide a mention electromotive force which is compared with others voltages.The bandgap mention used in diverse applications is based on the thought of Hilbiler in 1964 [ 1 ] aˆ‚A bandgap mention electromotive force with low sensitiveness to temperature and supply electromotive force is normally required in parallel or digital circuits. We will write a custom essay sample on The Usage Of A Bandgap Reference Voltage Engineering Essay or any similar topic only for you Order Now Low electromotive force and low power are two of import design standards in both parallel and digital systems.It been expected that the whole electronics system will be operated down to a individual 1-V supply in near future.The bandgap mention ( BGR ) generators which can be operated under 1-V supply have been widely used in DRAM, falsh memories, analog-digital convertor ( ADC ) and assorted parallel devices.So far many techniques have been proposed to develop electromotive force or current mentions, which can be about independent to temperature and power supply voltage.The bandgap mention is the major design to supply a preciseness electromotive force mention with low sensitiveness to the temperature and the power supply.when CMOS engineerings enter the nano-scale epoch, The demand for battery operated portable equipments will increase.the supply electromotive force has been scaled down from 1.8V ( in 0.18 µm engineering ) to 1.2V ( in 0.13 µm engineering ) , and will drop to merely 0.9V in the following coevals engineering [ 2 ] .In CMOS engineering, the parasitic perpendicular bipolar junction ( BJT ) had been normally used to implement P-N junction of the bandgap reference.But the traditional CMOS bandgap mention circuits did non work in sub 1-V supply voltage.the ground, that the minimal supply electromotive force can non be lower than 1V is constrained by two factors, which is the bandgap electromotive force of around 1.25V in Si, which is exceeds 1V supply.The others factor is the low-tension design of the relative to absolute temperature current coevals cringle is limited by input common-mode electromotive force of the amplifier.These two limitions can be solved by utilizing the resistive subdivision methods, low threshold electromotive force ( or indigen ) device, BiCMOS procedure or DTMOS device.However, those attacks frequently require specialised procedure and word picture which addition fiction cost and procedure stairss. Reference electromotive force generators are required to be stabilized over procedure, electromotive force and temperature fluctuations and besides implemented without alteration of fiction process.The bandgap mention ( BGR ) is one of the most popular mention electromotive force generators that successfully achieve the requirements.regarding the generators, the demand for the low power and low electromotive force operation is strongly increasing the spread of the battery-operated portable applications.A bandgap mention electromotive force is an indispensable constituent of an analog-to-digital converterIt is frequently used to provide a mention electromotive force which is compared with others voltage. A bandgap mention electromotive force with low sensitiveness to temperature and supply electromotive force is normally required in parallel or digital circuits.there are several methods to recognize a temperature independent voltage.the base emitter junction used as a nucleus constitu ent of the bandgap mention is the most popular approach.the general bandgap mention electromotive force mention electromotive force is described by a additive combination of base-emitter electromotive force. Bandgap mention circuit is widely used to supply stable current and electromotive force mentions in parallel circuits every bit good as in assorted signal CMOS circuits.A stable mention circuit should be robust against temperature, power supply and procedure variations.Sub-1-V mention coevals has got importance due to scaling ensuing in shrinking of MOS dimensions and decrease of power supply to minimise power ingestion. owing to follow Moore ‘s Law, it has become needfully of import to diminish the power in the chip.This puts the restraint on the power dissipation of mention generators.the design of this bandgap besides see for low power operation..In traditional BGR circuit, bipolar transistors and one or more resistances are used.BJTs that are used in BGR are in parasitic signifier in CMOS.resistor occupy big country on the bit and hence addition the cost.on bit tolerance of resistances vary from 20 % to 30 % .So, we have to replaced these constituents with MOS transistors t o better public presentation of BGR and to salvage bit area.The combination of different runing parts like subthreshold, additive and impregnation of MOS suppresses the temperature dependance of electromotive force mention. Aims: To set up a dc electromotive force or current that is independent of the supply and procedure and has a chiseled behaviour with temperature. To plan the BGR that independently to temperature and low noise and low electromotive force To plan bandgap mention that can be successfully operated with sub 1-V supply in standard 0.35 CMOS procedure without particular procedure engineering. Problem statement When CMOS technologies enter the nano-scales epoch, the demand for battery-operated portable equipments will increase.The supply electromotive force has been scaled down from 1.8V ( in 0.18 m engineering ) to 1.2V ( in 0.13 engineering ) and will drop to merely 0.9V in the following engineering [ 2 ] .in CMOS engineering, the parasitic perpendicular bipolar junction transistor ( BJT ) had been used to implement the high preciseness bandgap electromotive force references.However, the convential BGR generates a 1.25V mention voltage.Its fixed end product electromotive force limited the supply electromotive force and non suited for sub 1-V supply volateg operation.The ground why the conventional CMOS bandgap mention did non work in close 1-V supply voltage.One is that the bandgap end product electromotive force is about 1.25V [ 3 ] , which exceeds 1-V supply.The others is that the low temperature electromotive force design of the relative to absolute temperature current coevals cringle is limited by the input common-mode electromotive force of the amplifier.These two restrictions can be solved by utilizing the resistive subdivision method [ 4 ] , low threshold electromotive force device [ 5 ] , BiCMOS procedure or DTMOST [ 6 ] . But, those attacks frequently require specialised procedure and word picture which can increase fiction cost and procedure step.However, the bandgap mention working in low supply electromotive force has a higher temperature coeeficient than that of traditional bandgap reference.This resulted in the development of new temperature compensated techniques such as quadratic temperature compensation [ 7 ] , exponential temperature compensation [ 8 ] , piecewise additive curvature rectification [ 9 ] and resistance temperature compensation [ 10 ] .To implement these advanced mathematical maps with high truth, the development of the low electromotive force bandgap construction requires precision matching of current mirrors or a pre-regulated suppl y electromotive force, cascade current mirror [ 11 ] , and pre-regulated circuit are good methods to work out this problem.but the minimal supply electromotive force is tradeoff. Scope of work: A typical CMOS execution of a bandgap mention is shown in Fig. 1. The end product mention electromotive force VREF of the traditional bandgap mention circuit can be written as: Equation 1 trad bgr.bmp Figure 1: Traditional/conventional BGR circuit in CMOS engineering where A1 and A2 is the emitter countries of Q1 and Q2, and VT is thermic electromotive force. The 2nd term in ( 1 ) is relative to the absolute temperature ( PTAT ) , which is used to call off the negative temperature coefficient of VEB. Hence, if a proper ration of resistances is kept, an end product electromotive force with lowsensitivity to the temperature can be obtained. In general, the VREF is about 1.25 V, so that the conventional bandgap mention circuit can non be used in low electromotive force application, such as 1 V. Mention electromotive forces and/or currents with small dependance to temperature turn out utile in many parallel circuits. As many procedure parametric quantities vary with temperature, if a mention is temperature-independent, it is normally processindependent every bit good. If two measures with opposite temperature coefficient are added with proper weighting, the attendant measure theoretically exhibits zero temperature coefficient. The construct of the new proposed bandgap mention is that the two electromotive forces ( which are relative to VEB and VT ) are generated by merely one feedback cringle. The two-stage operational amplifier with p-channel input is used in thisnew proposed bandgap mention. The new proposed bandgap mention is shown in Fig. 2, which uses the resistive subdivision R1a, R1b, R2a and R2b to cut down the input common-mode electromotive force of the amplifier.The dimensions of PMOS devices M1 and M2 are the same.The opposition of R1a and R2a is the same, and th e resistanceof R1b and R2b is the same. Following the KCL at the nodesof V1 and V2 in Fig. 2, the mention electromotive force can be expressed as New Picture.bmp Equation 2 Where and.According to equation below: ) /R4 We can expressed equation 2.The point of Vref-conv is indistinguishable to the conventional mention electromotive force in equation ( 1 ) .In order to accomplish sub 1-V operation, the ratio of R1b/ ( R1a+R1b ) is used to scale down the mention electromotive force level.Therefore, the minimal supply electromotive force of the new proposed BGR can be efficaciously reduced to merely. The new proposed BGR mentions can operated under bomber 1V.The whole complete circuit to recognize the proposed bomber 1V BGR is shown below: New Picture ( 1 ) .bmp Figure 2: Complete circuit for new proposed Sub1V So, from the comparing above, I can clearly cognize what I will make on my ain undertaking, what my range of work.From this, i ‘ll go on the new proposed BGR design that already done but I will seek to minimise the supply electromotive force, temperature independent and noise consequence as possible so the BGR will successfully operated in sub 1-V. How to cite The Usage Of A Bandgap Reference Voltage Engineering Essay, Essay examples

X-Ray Screeners Could See X-Rated X-Rays free essay sample

Sharkey advertizes that airlines are trying to bring in X-ray units that will be able to look beyond clothing, to the outline of bare skin. This precaution is becoming effective because technology is getting more advanced. Since metal detectors can’t be as reliable as we once thought, serious measures need to be demanded. However, scientists have discovered the previous precautions of metal detectors are irrelevant due to liquid hazard that they cannot detect. This article even says, â€Å"it found that federal airport screeners using metal-detecting magnetometers did a miserable job identifying weapons concealed in carryon bags or on the bodies of undercover agents. † If airlines can’t find undercover agents hazardous weapons, what makes people think airlines should be trusted to discover hazards from terroristic attacks. This article is important because it discusses the public health, and safety. Of course airline security strives to be safe and have strict policy. We will write a custom essay sample on X-Ray Screeners Could See X-Rated X-Rays or any similar topic specifically for you Do Not WasteYour Time HIRE WRITER Only 13.90 / page On the other hand we have people who believe this extent of security is an invasion of privacy. By going about these precautions, we could be disrespecting people’s values, or possibly religion. This decision is very skeptical, there is much balance on either side to become an â€Å"even trade† per say. This article was written in 2005, at the time this topic was very relevant due to the dreadful tragedy of 9-11. In the after math of 9-11 people became unsure of their safety, and quit flying. Airlines saw a 30% drop in flight activity. The airline business was also negative in thousands of dollars due to the cost of delayed airlines. The only thing to do was advance security. When going public with the idea of this X-ray, many people spoke out about their privacy being invaded, and also their loved ones. America has many laws prohibiting the nude body to even be seen, so how could this be legal? This article would be a claim to value, because there are two ideas being argued about which is most important. This article informs us about the pros and cons of X-ray scanners. Yes, they are more advanced then the previous echnology before the tragedy of 9-11 and have a high chance of detecting hazardous substances. On the other hand, they invade your privacy down to your nude body. Is it law abiding to let a security guard be able to scan your children? In our society we know of nude to be specifically sexual. Our nude bodies are something we keep to ourselves. It comes as a disgrace to some to see people reveal their bo dy to strangers, or the public. There are professions that some may engage in that are known as exotic dancing, which is the revealing of the body. In Stripped: Inside the lives of an exotic dancer, Bernadette Barton says â€Å"even though this act is legal, it breaks the rules of being a respectable lady in this society. † Being the case, would make x-ray scanning for the public against the rules of a respectable society. In this article Joe Sharkey introduced his claim very well and surprisingly neutral minded. From a readers perspective he was able to produce information in a structured and very un bias manner. This article gave a great outlook on what all comes with the production of a new security precaution. This article was very effective to the public. Being the fact that this article had no warrant, makes it easier for the public to evaluate and think critically on which claim they prefer. Also due to the fact this article had no warrant made this article informal, instead of argument based. In a closing statement, this article demonstrated many point of views on the topic. Sharkey was very productive with getting all ideas on the table, and giving them with no preference of his own. Sharkey also brought much quotation into his article, and did much research to provide the greatest accumulation of information.

Sample Personal Statement Essay Example

Sample Personal Statement Essay As an undergraduate student at the University of New Mexico I have become increasingly aware of the complex network problems that I face as a citizen of the world. I have also realized the progress and success that I enjoy in the same capacity as the frontiers of medicine, technology and communication continue to expand. My desire to participate in the resolution of those problems and in the further expansion of those frontiers had inspired me to seek a degree in biology and entrance into a School of Dentistry. I intend to successfully complete program of dentistry and further my specialization in the area of endodontics. Upon completion of my degree programs I would like to return to the southwest region of the country to make my services available to the underserved population of the area. I would also like to spend some time serving the populations of Central and South America where I could gain invaluable experience and provide the much needed services of a specialist. My desire to enter the field of dentistry has grown as I’ve participated with professional oral health care providers in the field and observed a wide range of procedures. We will write a custom essay sample on Sample Personal Statement specifically for you for only $16.38 $13.9/page Order now We will write a custom essay sample on Sample Personal Statement specifically for you FOR ONLY $16.38 $13.9/page Hire Writer We will write a custom essay sample on Sample Personal Statement specifically for you FOR ONLY $16.38 $13.9/page Hire Writer My interest in dentistry began early on as I was involved in orthodontics for eight years before undergoing corrective jaw surgery. I gained a deep appreciation and understanding of what people in need of such services are experiencing, as well as a great respect and admiration for the professionals of that field. Through the practice of dentistry I desire to have a positive supportive impact on the lives of those I serve, as I experienced in my own life through my oral healthcare providers. I also desire to be a respected, contributing member of the community, and I feel that the field of dentistry will afford me such opportunities as I participate in it. I will be successful in dental school because of my dedication to the pursuit of academic excellence and my desire to succeed. I have gained experience in public speaking through my various service and academic activities and enjoy meeting and dealing with people, which will serve me in dental school and as a professional healthcare provider. I have increased my fine motor skills and manual dexterity through my study of guitar, which will also aide me in pursuit of a DDS degree. My service as a missionary in Mexico gave me a better understanding of the world and of life as I worked with people in many different situations. I struggled and succeeded in my search for ways to serve and help people in a language, land and culture that was not my own. Those experiences have given me needed skills and attributes to become a successful servant of the community and participant in the dental community. I have repeatedly shown my determination in the environment of the university as I have faced and conquered challenges. I was able to successfully return to the university after my two-year absence and have been successful each semester since in maintaining my scholarship. I have maintain my academic standing as I take full loads of course work and hold employment outside of class as well as sustain my family. I feel that I have been able to accomplish this because of the balance I seek as I participate in the academic, spiritual, social and family spheres of my life. Essay # 2 Author Accepted for 2006 Entering Class The smell alone used to make me nauseous. I could barely get through the front door before I would feel the hair at the base of my neck stand on end. I would sit uncomfortably in the waiting room chairs praying that my mom would have a change of heart to take me back home. This was the scene each and every time I had a dental appointment. Needless to say, I feared the dentist. My memories of the dentist are not highlighted with visits to the treasure box or the joy of picking out a new toothbrush. By the time I reached this part of the dental visit, I wanted nothing to do with anything that would keep me in the office even a second more. My first exposure to dentistry, out of the chair, came when I began babysitting for a dentist. He worked on the weekends, and his daughter and I would tag along. Initially I stayed as far away from the dentist chair as possible, but later, I became curious, and gradually observant. By the time I reached high school, I was intrigued by every aspect of dentistry. The procedures quickly turned from one of torment into something more familiar. Coming from a family of engineers and contractors, I recognized the doctor’s instruments because they were similar to tools I had grown up watching my father use. I began to think of dentistry as performing small scale construction in a small hole. Performing such intricate procedures while simultaneously utilizing my mind and hands both excited me and complimented my detail attentive personality. Since my interest first peaked, I have continued towards my goal to become a dentist, not only through high academic achievement, but with life experience. I obtained my dental radiography license and worked as a dental assistant during high school and was provided with the opportunity to observe a variety of dental procedures. I also gained exposure to the additional responsibilities of a dental professional ranging from the billing process to dealing with insurance companies. I got a glimpse of the organizational skills necessary to run a small business. I continued gaining experiences upon entering college by volunteering at a dental clinic that provides free services to the homeless. My service at this clinic has strengthened my desire to become a dentist. Volunteering at the homeless dental clinic has taught me the importance of dental hygiene and how it can affect every aspect of a person’s life. Most of the homeless patients have neglected their teeth for years, and realize that they need help. It is an amazing experience to watch the transformation in a person as their teeth are fixed. For most patients, it is a long process, and their self esteem visibly increases with each visit. By the end of the treatment, some finally have the confidence to get a job, and may return to let us know of their new found success. The personal contact incorporated with dentistry is appealing as it provides the opportunity to interact with individuals of diverse ages, cultures, and backgrounds. As a student and an employee I have to realize the importance of integrity, responsibility, and hard-work. I know that in order to earn the respect and trust of my patients, I must be dependable, energetic, and professional. I must have the confidence to take on the role of authority, while as the same time be willing to follow the lead of someone else if necessary. I have equipped myself with these necessary traits to be a successful dental student and professional through my classes, employment, and extracurricular activities. Working as an administrative assistance has equipped me with communication skills, and has taught me how to efficiently organize my time. Conversing with children with a mental illness while working as a mental health technician has built my character by improving my patience and revealing the traits necessary to earn the trust of others. Leading my university’s pre-dental society as president has taught me leadership skills and how to organize a group to work together. As a native New Mexican, I realize the states vast need for dental health care professionals, and would like to contribute by returning to the state after completion of my dental degree. Becoming a dentist has been my desire throughout both high school and college, and I have worked at becoming a well-round, educated, and experienced individual to achieve this goal. I have developed a strong work ethic, which, when combined with my choice of dentistry as a profession, has been greatly enhanced by the opportunities that I have had to work in this field. I firmly believe that I have built a foundation from with I will move forward to earn my dental degree. I am determined to success, and ready to begin this challenge. Essay # 3 Author Accepted for 2006 Entering Class I can vividly recall my grandfather opening his tool shed in hopes of inspiring his five year-old grandson to create something beautiful out of pieces of wood that were old and otherwise discarded. A passion for intricate artwork has seemingly always been a part of my life. Whether it is throwing a pot on a wheel or tying flies to mimic aquatic insects for the art of fly fishing, I have always loved to create pieces of art with my hands. A true love for intricate artistic work is a necessary and an essential characteristic of a dentist. I have devoted five years to playing guitar, and it has become part of my everyday life. Great manual dexterity is required to play the guitar, and this manual dexterity bears a direct correlation to dentistry. When trying to undertake a new musical piece, the initial excitement overwhelms me and accomplishing a beautiful musical piece provides great satisfaction. Similarly, in dentistry, when a patient has a problem, the dentist will assess and treat the individual. On many occasions, I have found that the dentist is eager to start the procedure and pleased with the work and the well being of the patient. It is my belief that dentists hands not only have the power to grasp the world but the power to change it. I feel that dentistry will afford me with the opportunity to do something I love, working with my hands. The manual dexterity involved in dentistry is only a fraction of what makes the profession wonderful. To a further extent, a dentist must have a humanistic instinct to provide care to others. As a college freshman, I volunteered every weekday of my summer as a literacy leader for Americorps. While volunteering as a literacy leader 40 hours a week at Cesar Chavez Community Center, I had the privilege of mentoring and teaching young boys how to read. Spanish happened to be the childrens first language and overcoming the language barrier became easier as I immersed myself deeper into the language. Teaching these children allowed me to develop a greater understanding of people and a trusting and caring relationship with each child. For the past three years, I have been part of Healthy Smiles, Special Smiles, and Give Kids A Smile Day. These three volunteer events give opportunities for the entire dental community to work together for the sake of childrens dental healthcare and I have established that this is important to me and my character. I have had many memorable experiences from these volunteer events and they have all taught me how to be kind, gentle, and comforting to the patients. I look forward to dedicating my time to such volunteer events as a dentist. In addition to these volunteer events, I also enjoy participating in extracurricular activities such as running, lifting weights, snowboarding, reading, and fly-fishing. All of these activities help me cope with stress and give me time to see where I fit in this world. For the past year, I have been working at Starbucks as a Barista. This job has shown me people from all walks of life and has given me a better understanding of people. Many people who come into Starbucks are fascinating and I enjoy learning about their lives. The social skills obtained from this job are an invaluable asset to my character. One of my greatest accomplishments has been being an active member of the Pre-Dental Society for my entire career at the University of New Mexico. It was my pleasure to be the Vice President of the Pre-Dental Society for the past year. I am currently the President of the Pre-Dental Society and look forward to the upcoming year. These two leadership positions have enriched my public speaking ability and given me the confidence to articulate my ideas clearly. Extracurricular activities give you a time to reflect on the type of person you are and the merit of your character and this, too, is important to me. These extracurricular activities have refined me as a person and given me new and satisfying experiences. There is something unique about dentistry that draws you in the more you immerse yourself into the profession. Maybe it is the dedication to excellence or the altruism that gives you a sense of belonging. Regardless of what brought me to dentistry, I am here to stay because it is where I belong. Essay # 4 Author Accepted for 2006 Entering Class. Activities that challenged my curious mind such as solving crossword puzzles and riddles thrilled me as a child, and my love for challenges expanded into other areas as I grew older. I began playing musical instruments at the age of six, beginning with the piano and ultimately moving on to the clarinet, which I have played for the past 9 years. The clarinet allowed me to achieve greater manual dexterity through countless hours of practice, as I have trained my hands to move carefully and precisely. There is no greater feeling than that of having mastered the fingering for a particularly difficult musical piece. Similarly, it will be necessary as a dentist to devote many hours perfecting the techniques essential for providing high-quality oral healthcare and I will feel great satisfaction in doing so. Not only should good dentists acquire great manual dexterity, but they should also have excellent hand-eye coordination. While helping a PhD student conduct research using Drosophila flies, I was required to manipulate the small specimen to identify their species, sex, and size. This experience permitted me the opportunity to improve on the eye-hand coordination skills that are crucial for good dentistry. The challenges I will confront throughout my course in dental school do not daunt me, but motivate me. It has always been exciting for me to take problems and solve them using my mind and my hands. Not only has the technical difficulty of playing an instrument satisfied me, but also the sheer beauty of the art form. Music has the ability to impact the emotions of people. I see a similar opportunity in dentistry to bring joy and happiness to peoples lives. By providing a person with the appropriate treatment, a person who has a low self-esteem due to untreated dental problems can be transformed into a person who has self-confidence. As a child, I had a terrible overbite and was in dire need of an orthodontist. The result of braces was more than a corrected bite. It yielded a higher self-esteem and a greater sense of self-confidence in me. I would like to provide others with the chance to have this same experience. Shadowing in many different dental offices allowed me to realize that all forms of dentistry can have this effect on patients, whether it was crowns from a general dentist or a set of dentures from a prosthodontist. Helping people psychologically is an additional result of what is most important, which is taking care of the patients overall oral health. One of the most influential moments that lead me to pursue a career in dentistry was the day a UNM Pre-Dental Society guest speaker discussed the underserved communities in New Mexico. I was astonished to learn that all but a few counties are in dire need of dentists. From that day forward I made it my personal goal to become a dentist so that I could help the people of New Mexico. Helping people has always been a part of my life. I have always enjoyed helping classmates with schoolwork as well as spending many hours teaching my younger sisters. In the past year, I was employed as a Biology/Chemistry tutor, which allowed me to help other students succeed. I have also been able to help others through community service and volunteer work such as annual clothing donations to homeless shelters, participating in volunteer events such as Making Strides Against Breast Cancer walk, Give Kids a Smile and Special Olympics Special Smiles. These events helped me to realize that I want to continue helping people in the future. Being elected Historian of the UNM Pre-Dental Society gives me yet another way to help other students, now in their pursuit of a dental career. I would like to have the opportunity to continue helping others through dentistry. The desire to help people was instilled in me by my family. They have always encouraged me to work hard and praised me for my accomplishments. As the first person in my family who will graduate from college, I can understand the importance of family encouragement in having accomplished this goal. In the future I would like to have my own family, providing the same encouragement I was so fortunate to have as a child. I will be successful in dental school because I possess perseverance. Being determined and persistent has helped me overcome many obstacles in the paths towards many goals in my life, and these attributes will prove just as beneficial in my pursuit of a dental career. Essay # 5 Author Accepted for 2006 Entering Class My name is â€Å"name of author. † I am twenty-four years old and have graduated from the University of New Mexico in Albuquerque. My studies were concentrated on Biology as my major, and Spanish as my minor. I was adopted from South Korea when I was seven months old. My family and I resided in Milwaukee, Wisconsin until I was four, then Chicago, Illinois until I was twelve. After that we lived in Glendive, Montana. I have a unique perspective of lifestyles and culture due to the diversity of the places that have shaped me and helped me become who I am today and they have defined what I want to pursue professionally, which is Dentistry. I have come to understand the importance of comparative and contrasting qualities. In Chicago, the city was the hub of civilization and in Montana the citizens relied on and lived for the land and cattle. Presently, in Albuquerque, I have come to love and appreciate the Southwest style and diverse culture. Everywhere that I have lived and traveled has taught me something new and offered irreplaceable life experiences. I chose the University of New Mexico because I wanted to be far enough away from home to be independent, and also because they offered majors in biology and dance. I was on the UNM dance team for three years. Throughout college my interests have expanded which is why I now still study Spanish as well as biology. After attending an exchange program to Trujillo, Spain, I plan to utilize the Spanish language in the dental practice. I have come to respect and love the now-thriving language in America. I plan to educate and assist people in upholding a condition of well being of every ethnicity and background. I am constantly seeking new experiences as well as responsibility and have been a resident advisor for two years and then a Student Head Resident for one year. This is my second year that I am an Area Coordinator in the residence halls. Working directly with student, faculty, staff, and peers, I know I thrive to work directly with many people in a personal setting. With the responsibilities of these occupations, I have also learned many managerial skills, which are applicable to the dental field. My family is an important aspect of my life. Since I am adopted I have learned that the value of a family is measured in love, not in bloodlines. My family has supported me in everything that I do, especially now as I apply to dental school. They have taught me trust, responsibility, respect, determination, honesty, and of course, love. With these attributes and the support from my family, I am confident in myself to further broaden and excel in the pursuit for an education in dentistry. I have been involved in a variety of activities throughout my life. These experiences have helped me to define who I am as a person and where I fit into society. Trying different activities has broadened my horizons and raised the expectation for myself. They have taught me how to learn and attempt to strive for my ultimate best. They have also taught me that trying new things is constantly a good lesson to remember throughout my life. The most important thing that I have taken from these different activities is the ability to narrow and define exactly what it is that I want to do with my life, which is working in the dental field. I started thinking about career choices while attending college; and while I have always had a passion for biology and the fact that it is the study of life, I have not had a desire to be a dentist since I was little. From my love for biology derived my compassion and drive to improve the quality of life for others. Having worked with people all my life, there is nothing I would rather do. The field of dentistry gives hope, confidence, and health to others. I want to give back to the community my erudition to better the lives for individuals and families in sustaining a soundness of body and mind. I am determined to do whatever it takes to excel in the field of Dentistry. Essay # 6 Author Accepted for 2007 Entering Class He gave me something valuable, something I could not have done for myself. That is how I felt each time I left my dentist’s office as a teenager. I wondered how the dentist must feel on the giving side of the relationship and I hoped to one day be in a profession that would allow me to help people daily in such a tangible way. As I matured and became more serious about choosing a profession during my college career, I realized that dentistry is exactly what I want to do with my life. In my preparation for a dental career, I have spent many hours observing this same dentist who inspired me years ago as he helps others maintain their dental and overall health. I clearly see the satisfaction that can be achieved by practicing dentistry. I have also been able to observe all the nine dental specialties (except radiology and pathology) seeing a wide variety of dental procedures ranging from simple fillings to more technical gingival grafts, osseous regeneration surgery, apicoectomy, veneer smile makeovers, etc. The more I see, the more eager I become to actively participate in such an exciting profession. Success in the dental field requires dedication, compassion, and the ability to work intimately and effectively with people. I am well prepared to take on this challenge. I have worked as a corporate trainer for a 500-employee quick-lube franchise in the Southwest for the past three years while completing a Bachelor of Business degree at the University of New Mexico. My professional experience continuously hones my interpersonal communication skills, public speaking skills, and leadership as I help manage a business and educate hundreds of people. As a corporate trainer, I have become more self-motivated, organized, and detail-oriented through being responsible for designing company training programs, modifying company policies, and teaching new skills to managers and employees alike. I have also developed further dedication and commitment working to provide for a family while attending classes full time and participating in other extracurricular activities. Dentists frequently tell me that managing a practice is one of the activities they struggle with the most. My business background and strong interpersonal skills will enhance my ability to succeed in dentistry. I am serving as the Vice President of the New Mexico Pre-dental Society this coming year where I can use these skills to help New Mexico produce more dentists and reduce the state’s immense shortage. As a dentist I would like to be actively involved in advancing the profession and promoting improved oral health in my underserved state and our nation. My professional experience provides a strong foundation to achieve these goals. I spent two years living in remote areas of Brazil serving an ecclesiastical mission and learning to read, write, and speak fluent Portuguese. In Brazil I witnessed the great suffering caused by poor oral health. So many teenagers had mouths full of decayed permanent teeth, which must have caused great pain and loss of self esteem. They did not even have a way to get these teeth safely extracted. Access to dental care and proper oral hygiene education could have prevented nearly all these problems. I hope to someday participate in humanitarian health care programs in Brazil and I also know that there are far too many Americans with limited access to care. I plan to serve in one of the smaller towns of New Mexico to help alleviate this great need. For the past three years I have volunteered for a program called Taxhelp New Mexico where I did free tax preparation for low income and elderly families. I love working with people and enjoy the opportunity to teach them ways to save money on taxes. They leave so grateful and I get that same feeling that I gave them something valuable they could not do for themselves. I greatly enjoy teaching others and have already started to ponder ways to educate and motivate patients to better maintain their oral health. These, and many other events, have kindled my aspirations to become a dentist and have prepared me to be successful during and after dental school. Dentistry is a perfect way to combine my affinity for business, my passion for learning the biological sciences, and my desire to teach and serve others. I am anxious to achieve my goals and consider it a privilege to be starting a career in a field that is so respectable and that gives back so much to our communities.

Butterfield v. Forrester

Butterfield v. Forrester Free Online Research Papers The social problems that society was originally trying to solve were how to equitably resolve issues of liability in negligence cases. In the case of Butterfield v. Forrester (1809), the plaintiff was injured after striking an obstruction in the roadway. The respondent while making repairs to his home put a pole across the road. The plaintiff, who had just left a public house as it neared dark, while riding his horse violently through the streets, struck the pole and was seriously injured. A witness stated that if the plaintiff had not been riding so recklessly he would have observed the pole. There was no evidence the plaintiff was intoxicated at the time. There was nothing to state what appropriate behavior was, so the judge created the reasonable man standard. The reasonable man standard states that every human has a duty to act reasonably; therefore, a reasonable man would not have obstructed the road. The respondent countersued the plaintiff for negligence for racing through an occupied area at night. The judge had to create another rule because both parties were negligent. The judge found that it was not fair for the plaintiff to receive recovery if he or she contributed to his or her own injury. The legal rule that was created to solve this problem was contributory negligence, which stated that if a plaintiff’s own negligence was a contributing cause of his injury, he was barred from recovering from a negligent respondent. The problem with this rule is that it often leads to inequitable results. For example, if a respondent is found to be ninety-nine percent negligent and the plaintiff only one percent negligent, under this rule the plaintiff is still barred from recovery. Also, if there is no punishment and no one held liable there would not be any reason to act with vigilance. Increasingly people begin to question the unfairness of this ruling and it created even more problems. The social problem that society was now faced with was trying to alleviate the harshness of the application of the contributory negligence rule, which bars recovery for the plaintiff if they were at all negligent. In the case of Davis v. Mann (1842), the plaintiff tied down his donkey’s feet to keep it from running away and the donkey was left by the side of the road. The respondent was a business owner who hired a man to deliver his beer in order to keep his costs down. The respondent’s driver was coming down in his wagon at a high speed and hit the donkey and killed it. This case introduced the respondent superior rule, which held employers liable for their employees actions. Mann countersued based on the contributory negligence rule because Davis broke the law when he tied up his donkey’s feet and left it by the road. The judge had to make a new rule, which was â€Å"the last clear chance doctrine†, which is a doctrine in the law of torts that states th at a negligent plaintiff can recover damages if they are able to show that the respondent had the last opportunity to avoid the accident. Some of the problems that emerged from this rule were that the person with the last clear chance may have only been five percent negligent and someone else contributed much more to the negligence than the person being held accountable. This was almost always the case after the Industrial Revolution The social problem that society was trying to solve was that the Industrial Revolution introduced heavy machinery and in this setting, the worker always had the last clear chance, which created instability. In the case of British Columbia Electric Railway v. Loach (1915), Benjamin Sands was driving in a wagon and drove it over a railroad track, while an oncoming train was near. His passenger jumped out. Sands was struck and killed. The train had faulty brakes which were discovered the day of the accident. If the brakes had been working, the train would have stopped. This case introduced the proximate cause rule, which is the primary cause of an injury. It’s an act from which an injury results as a natural, direct, uninterrupted consequence and without which the injury would not have occurred. The problem with this rule is that it is extremely confusing and in application hard for a jury to comprehend and handle. The social problem that society was now trying to solve is how to share liability between the plaintiff and the respondent, so that it’s fair and easy for a jury to understand. In the case of Maki v. Frelk (1968), the respondent ran a stop sign traveling at a high speed and was charged with many traffic violations. This case took place in a jurisdiction that was still using the contributory negligence rule, making Maki responsible, because he could have slowed down and prevented the accident. The Maki family asked the court to adopt the comparative negligence rule. This rule states that a plaintiffs negligence is not a complete bar to his recovery. The plaintiffs damages are reduced by whatever percentage his own fault contributed to the injury. This requires the jury to determine, by percentage, the fault of the plaintiff and respondent in causing the plaintiffs injury. For example, suppose a plaintiff is injured in a car accident and incurs one million dollars in damages. The jury determines that the plaintiff was twenty five percent responsible for the accident and that the respondent was seventy five percent responsible. The plaintiff will then be allowed to recover seventy five percent of his damages, or seven hundred and fifty thousand dollars. In 1931 Wisconsin adopted the comparative negligence rule and was the first to modify it. Today, twenty three states use a modified form, ten states use a pure form, and two states use a top bottom system, which states that y ou have to have a low degree of negligence and they have to have a high degree of negligence or you are barred from recovery. The goal of the civil justice system in the United States is to maintain social stability through fairness. The evolution that has taken place in the judicial system has reflected the changes in society as well as a better understanding of the civil process. Some of the early attempts seemed to always favor highly one side over the other without taking into account all of the facts. The continual tweaking of the system has given us one that appears to be equitable and relevant for the times. As society, technology, and the environment change so should the policies that govern it. Even though the early rulings didn’t appear to be impartial they set the precedents for the existing system which is fair and functional. Research Papers on Butterfield v. ForresterUnreasonable Searches and SeizuresThe Relationship Between Delinquency and Drug UseBringing Democracy to AfricaCapital PunishmentThe Effects of Illegal ImmigrationQuebec and CanadaHarry Potter and the Deathly Hallows EssayPETSTEL analysis of IndiaCanaanite Influence on the Early Israelite ReligionAppeasement Policy Towards the Outbreak of World War 2

A Teen Author Success Story - Interview With Anna Caltabiano

A Teen Author Success Story - Interview With Anna Caltabiano A Refreshing Teen Author Success Story - Interviewing Anna Caltabiano While the good folks of the â€Å"publishing industry† are discussing trends, numbers, and predictions over at the DBW conference, we thought we would give the readers of the Reedsy blog a sneak peek of what the future could actually hold.Today, we interview Anna Caltabiano, a rising teen author who self-published her first novel, All that is Red at the age of 14. She did things her own way because she didn’t know how a book was supposed to be written or published. And guess what? She nailed it. She now has a three-book deal with Hachette, and published the first of those last year.Whatever the future of publishing is, authors will always be at its core. And It is today’s teen author community that will ultimately shape it, a community we don’t know too well†¦Hi Anna, great to have you here. I loved reading your story in The Guardian, particularly because, as a young author, you offer a fresh view on writing and publishing.  Is there something, in y our opinion, that characterises a â€Å"teen author†? Something you, for example, would do very differently from your elder peers?Thanks for having me on the Reedsy blog! One of the things I love the most about being an author my age is that I don’t have to look back on my teenage years to write from that perspective. Adults can look back on their experiences and give advice they wish they had heard when they were our age. Though I’m too young to do that quite yet, I can talk about things as I experience them- the good, the bad, and the plain messy.You said you did things â€Å"your own way† for your first novel, because you didn’t know how you were supposed to do them. Now that you’ve been through the â€Å"traditional† process (signing with a publisher), which â€Å"way† do you prefer? What have been, so far, the pros and cons of having a publisher?At their core, both traditional and self-publishing are actually very similar. Though it sounds obvious, most of the effort is in actually writing the book. The other essential common ingredient of both approaches is that turning a raw story into a finished novel requires seeking out and learning from a network of editors, cover artists, publicists, and proof readers. In a traditional publisher, the network is, for the most part, â€Å"in house,† while in self-publishing, you must take the initiative to create your own network. Both paths are exciting journeys.Usually, when you start from nothing, with no knowledge, and have to learn on your own and do things â€Å"your own way†, you actually end up discovering a smarter way to do it (that’s often how startups are born). Does that apply in your case? Have you done some particularly innovative things that have sparked your success?When I started my writing journey, I clearly did not know anything. I trolled the internet to learn what I could, but I also found experienced writers, publisher s, and various people in the book business who were willing to share their experience and give advice. There are so many â€Å"how-to† books, and so much â€Å"established wisdom† in this industry, but in the end the right path to writing and publishing is not the same for everyone. For example, I live in Northern California, but my initial breakthroughs have tended to come from London, and then later migrating to the US. I am not sure why, but it could be that my writing style and subject matter is closer to English tastes, or it could be that simply through chance, I happened to first find people that believed in my writing in England.You have a three-book deal with your current publisher. But do you see yourself going back to self-publishing after that? Or become a fully hybrid author?It’s really exciting! As for the future, it’s hard to tell even what type of novels I will be working on. I think the most important thing is to work with a team thatâ₠¬â„¢s as excited as you are to tell the story you want to tell, whether that leads you to self-publishing or traditional publishing.How did you self-publish? Did you basically replicate the steps of traditional publishing, hiring several editors and a cover artist?As I mentioned, the basic steps in writing a novel are quite simple, and the same whether done through a traditional publisher or self-publishing. You have to write the novel, go through a very extensive editing process to make the novel as good as possible, make sure that it is carefully proof read, and design an attractive cover. I found great people to help me in all of these areas, but also did much of it myself, so I felt a huge sense of accomplishment when it was all done. When I moved on to traditional publishers for my trilogy, I found I was actually more experienced in all of these aspects of creating a novel because I had to directly manage and participate so deeply in all aspects during the publishing process of my first book.You wrote most of your first novel on your iPad, with some bits of dialogue on your iPhone (texting yourself). This actually reminded me of some  Japanese novels that were written in SMS in the 2000s. We often hear that the future of content consumption is mobile, do you think the future of long-form writing can also be mobile?Definitely! As a reader, when I’m in the middle of a good book and I can’t wait to get home to finish the rest of it, I’ll download a copy on my phone to finish it during a break at school or in line at lunch. For the longest time, my dad thought I was crazy, but even he has started reading poetry on his phone.When I’m writing, I’ll have a quick idea I’ll want to write down before I forget. This often leads to me writing a scene or an entire chapter on my phone. Writing and reading can both be mobile. Whatever feels comfortable. There’s no wrong way to do either.How do you go about the writing p rocess? Do you first plot, outline and define the structure? Or do you dive straight into it?  Though every book is a bit different, I tend to be an outliner. I’ll start with a few characters in mind, and a mental image of what I want the end of the book to leave the reader with. I’ll write starting from the beginning of the story, following my outline, but inevitably my story veers off into an unexpected direction and I change my outline to follow it.You have a particularly awesome website in terms of design. At Reedsy, we have a particular focus (like most startups out there) on design, as we believe it is going to play a much more important role in the future of internet. Is that a belief you share?Thank you! I think design needs to be two things: nice to look at and easy to use. With the internet, I think we’re now more accustomed to everything being at our fingertips. Being user-friendly is a given. In our current world, I think the way to stand out from the pack is to create something visually attractive that draws in the user.Many authors, even established ones, still really struggle with social media. Teen authors have the chance to have grown up with those, understand them, etc. Do you think it is possible to be a successful author today without having a strong social media presence? Would you have any tips for other authors for that?Social media helps me connect with my readers. I hear first hand what they liked or didn’t like about my latest story, and I find myself taking that into account when I’m writing my next work. Though I’ve grown up with social media and almost everyone I know uses some form of it, I still find social media challenging at times. It can be hard to find a balance between maintaining some amount of privacy and being â€Å"with it† in terms of social media use. My biggest tip is to try to show your best self on social media, rather than try to promote your book. People follow y ou on Twitter and Facebook to learn more about you and to hopefully interact with you. If they wanted to read a summary of your book, they would look elsewhere.Finally, because it’s that time in the year, what do you wish for yourself in 2015? And for the publishing industry as a whole?That’s a hard question! With the upcoming adventure of publishing two books this summer in two different countries and finally graduating high school, I know I’ll be learning and doing a lot of new things. I hope I’ll be able to use what I’ve learned in 2014 and apply some of that this coming year. As for the publishing industry, I hope it keeps taking new changes in stride, as everything needs to continue to evolve to stay with the times.Thanks a lot for your time, Anna!You can find Anna and Reedsy on Twitter:  @caltabiano_anna  and @ReedsyHQCredit for the Japanese cell phone novel photograph goes to Tyler ShoresDo you, too, think that indie and traditional publ ishing are actually pretty much similar? Or that the future of writing is mobile? Do leave us your opinion, or any question for Anna, in the comments below!

Service Management Essay Example | Topics and Well Written Essays - 1000 words - 1

Service Management - Essay Example Nevertheless, there are numerous challenges experienced by the company and very often their customers are looking for services from other container-based shipping industry companies. In order to become a competitive rivalry for other shipping companies, COSCO is focused on service strategy improvement. China positions itself as the largest international company, providing with their services 75% of international cargo volume. COSCO in XXI century â€Å"will focus on providing differentiated and value-added services to acquire long-term contracts and life-long customers. As alliances and mergers have become a major part of the international shipping industry, we (COSCO) will co-operate closely with our partners. We aim to be a world-class global shipping service provider, in the near future, with high efficiency and high quality service† (China Cosco Holdings Confident on Recovery in Container Rates, 2010). Therefore, COSCO positions it as the world’s leading shipping in dustry company, which is able to provide its customer with efficient, high quality services. The Company contributes much for financial and technological development of the company. Thus, it should be noted that COSCO is concerned about improvements of infrastructure of the Company, development of strategies, which refer to the modern needs of the international society and the newest tendencies in the shipping industry. Starting from 2002 the country is able to offer to the clients â€Å"a comprehensive package of ocean shipping services with fleets covering a wider range from traditional bulk tonnages to more value-added ones such as post-panamax container vessel, heavy-lift ship, LNG carrier and so on† (China COSCO 2010). Value-added services and life-long customers are of great importance for COSCO. The main challenge for the company occurs, when potential clients find out that to reach Shanghai from Chongqing takes about 900 miles. Thus, shipping goods from Chongqing to S hanghai takes too much time. The Company tries to deal with this problem in spite of the fact that rail system of China is fragmented. Moreover, potential international clients are scared off by challenging import-export documentation: it takes too much time at the customs. Licensing and trade challenges in China can be facilitated by WTO. Thus, service challenge should be solved within the company and nationally. To repair roads in the country and improve roads in the ports is on behalf of the Chinese government. COSCO should work hard in order investors wanted to support the Company. â€Å"Green protectionism policy† is of high relevance in the world. Therefore, COSCO is focused on environmentally friendly shipping services. Potential clients are interested in COSCO’s post-crisis measures, because sub-prime crisis special study team in COSCO enabled the Company to recover as soon as possible. An innovation of the Company, such as tariff decrease for ASEAN countries f rom 9.8 percent to 0.1 percent is rather attractive for the international partners (China, Korea Aid for Shipping Industry May Prolong Rates Slump, 2009). Out of 4 million of TEUs globally, many countries are estranged from container-based shipping services. COSCO and its subsidiaries have more than 120 ports in 40 countries. The sustainability of the Company is provided by logistics. There is a shift from passive service to active service. Starting from 2010 the Company implements TCSS, system, which considers customer’

Answers to Essay Questions Assignment Example | Topics and Well Written Essays - 1500 words

Answers to Essay Questions - Assignment Example Although economic prosperity was the main motivation behind the move to the West, Native Americans actually suffered deeply during the process due to the struggle with the settlers. After the Civil War, Native Americans confronted a growing wave of settlers, who represented various social classes, including prospectors, ranchers, and farm families (Lincoln, 1997). One of the main problems at that time was that the newcomers brought with them many new diseases that ravaged the tribes. In addition, settlers damaged the Native American economy in many ways, such as by killing off the buffalo, which was one of the main economic resources of Native Americans. Consequently, Native Americans decided to defend their lands and their ways of life against the oncoming settlers. They were engaged in fierce battles during the 1860s and 1870s (Lincoln, 1997). However, lack of resources and spread of diseases led to sharp decreases of the population and power of the tribes. Hence, new settlers succ eeded in stabilizing their existence in Western territories, mainly in Oklahoma, Wyoming, and the Dakotas, challenging the traditional Native American way of life. In this context, it has to be stated that railroads played a major role in the development of the region during that time. Essentially, building of the railroads spurred western settlement, as in 1862, Congress gave permission to the construction of two main railroads to link the Midwest and the West Coast. Those two main railroads are The Union Pacific Railroad, which extended westward from Nebraska; and the Central Pacific Railroad, which went eastward from the Pacific Ocean (Lincoln, 1997). These two railroads met at Promontory Summit, Utah, in 1869, signifying a new era in Western history. Indeed, the expansion of railroads was strongly encouraged by Federal and state governments. This sincere belief in the extreme economic importance of railroads pushed Congress to authorize the building of the transcontinental railr oad in 1862, although this authorization let them agree to loan hundreds of millions of dollars to the two corporations to construct it. In addition, Congress agreed also to give the railroad companies millions of acres of Western land, which the railroads sold to repay their loans. In that sense, many historians argue that such major railroad companies, with the federal support they got, were the actual colonizers of the West (Lincoln, 1997). To visualize the role of railroads in encouraging migration to the West, it is important to refer to the fact that railroads provided free trips to the West and offered long-term loans to settlers. Hence, it can be concluded that railroads played significant roles in the process of settlers’ migration to the West after the civil war. American foreign policy prior to World War I led it to acquire overseas territory, build the Panama Canal, and police Latin America. How did these events come about? What justifications did Americans use fo r these actions? Were these actions justifiable? Prior to World War I, the United States pursued an aggressive policy of expansionism, acquiring overseas territories and extending its political and economic influence around the globe. Historically, the United States

Why Did America Become Involved in WWI Essay Example for Free

Why Did America Become Involved in WWI Essay Why did America become involved in WWI? How did President Wilson justify his decision to enter the war in 1917? Was the war in the national interest? At the start of 1917, the United States and its president was not interested in fighting in the war. President Woodrow Wilson wanted to remain neutral. Even though 2 years earlier in 1915, a Germen u-boat destroyed the R. M. S Lusitania, in which 128 Americans were lost. The United States was interested in selling weapons and help with funding the allies in the war. There were several factors that propelled the United States into the war. One of the factors that contributed in the President’s design in entering the war was a message intercepted by the United States government from German Foreign Minister Arthur Zimmerman to the Mexican government. This proposed a German-Mexican alliance, if Mexico declared war on the United States. If this happened, it would return Texas and other territories to Mexico. On April 6, 1917, the U. S. joined its alliesBritain, France, and Russia to fight in World War I. World War I was also know as the great war or the war to end all war’s. This Great War cost the United States $33 billion dollars, and 116,708 were killed, along with 204,002 were wounded from the United States. The Great War cost over 37 million lives from both sides. As Woodrow Wilson would describe this war, The Americans who went to Europe to die are a unique breed. (They) crossed the seas to a foreign land to fight for a cause which they did not pretend was peculiarly their own, which they knew was the cause of humanity and mankind. These Americans gave the greatest of all gifts, the gift of life and the gift of spirit.

Sonata Allegro Form :: essays research papers

Sonata Allegro Form The roots of this form can be traced to the simple binary form of the baroque era. With binary, the two sections are thematically similar with a sameness of texture and theme throughout the movement. The term sonata originally referred to instrumental music, not a particular form of composition. The Baroque sonata can be traced back to an instrumental song of the late Renaissance called canzon da sonar. This leads eventually to the trio sonata, for four instruments despite its name, which consisted of two melody instruments, a chord playing instrument, and a basso continuo. Along with the trio sonata, there was the solo sonata that was written primarily for a melody instrument and a basso continuo. In the late 1600s, the word sonata was associated with sonate da chiesa, for church, and sonate da camera, for chamber. With the rejection of complicated Baroque style of music, the classical era came about. The idea of simpler music would appeal to a broader audience, thus making the classical era more popular. The change was not sudden; rather, the Rococo style was like a transition period. Carl Philipp Emanuel Bach was an important character in the changing of styles. The Rococo style was known as an expressive or sensitive style. Baroque music usually remained in the same mood throughout a piece, whereas this new style would sometimes change moods abruptly with highly contrasting ideas. The use of ornaments in music gradually went out with the complicated baroque music. Simpler, more original melodies emerged with this new style. During the Baroque era, instrumental music and vocal music were equally important. This contrasts the Classical era where instrumental music was more prominent than vocal. Sonata form, or sonata allegro form, consisted of three major sections: exposition, development, and recapitulation. Exposition presented the main theme of the movement in the tonic key. Then the theme transitioned by a bridge to the dominant key if the movement was major or to the relative major if the movement was in a minor key. The second theme, usually given in the dominant key, cadenced at the codetta with a double bar.

Color blindness affects

Color blindness affects a significant number of people, although exact proportions vary among groups. In Australia, for example, it occurs in about 8 percent of males and only about 0. 4 percent of females. Isolated communities with a restricted gene pool sometimes produce high proportions of color blindness, including the less usual types. Examples include rural Finland, Hungary, and some of the Scottish islands.In the United States, about 7 percent of the male population†or about 10. 5 million men †and 0. 4 percent of the female population either cannot distinguish red from green, r see red and green differently from how others do (Howard Hughes Medical Institute, 2006). More than 95 percent of all variations in human color vision involve the red and green receptors in male eyes. It is very rare for males or females to be â€Å"blind† to the blue end of the spectrum. About 8 percent of males, but only 0. percent of females, are color blind in some way or another, whether it is one color, a color combination, or another mutation DESTRUCTION 2004 TSUNAMI CAUSED IN INDIA Tamil Nadu The state of Tamil Nadu has been the worst affected on the mainland, with a death toll of 7,793. Nagapattinam district has had 5,525 casualties, with entire villages having been destroyed. Kanyakumari district has had 808 deaths, Cuddalore district 599, the state capital Chennai 206 and Kancheepuram district 124.The death tolls in other districts were Pudukkottai (1 5), Ramanathapuram (6), Tirunelveli (4), Thoothukudi (3), Tiruvallur (28), ThanJavur (22), Tiruvarur (10) and Viluppuram (47). Those killed in Kanyakumari include pilgrims taking a holy dip in the sea. Of about 700 people trapped at the Vivekananda Rock Memorial off Kanyakumari, 650 were rescued. In Chennai, people playing on the Marina beach and those who taking a Sunday morning stroll were washed away, in addition to the fisher folk who lived along the shore and those out at sea.The death toll at Velan kanni in Nagapattinam district is currently 1,500. Most of these people were visiting the Basilica of the Virgin Mary for Christmas, while others were residents of the town. The nuclear power station at Kalpakkam was shut down after sea water rushed into a pump station. No radiation leak or damage to the reactor was reported Pondicherry An estimated 30,000 people are homeless in the Union territory of Pondicherry. The current official toll is 560. The affected districts are Pondicherry (107 dead), Kariakal (453 dead).Kariakal is the most devastated area from the Pondicherry Union territory. Where massive destruction and loss of causalities accure. This mishap occur because of uncover stone block. Mostly fisher folk are affected due to location and distance between sea and their basti (village). Fishing peoples are Just preparing for venturing into sea and within fraction of seconds everything wash away and their boats are damaged they lost everything in terms of life and property. M ore than 453 people are died so far and still some are missing. Kerala The current official toll is 168.The affected districts are Kollam (131 dead), Alappuzha (32 dead), Ernakulum (5 dead). The tsunami that hit the Kerala coast on December , were three to tlve metres high ,according to the National Institute ot Disaster Management,(NlDM) which functions under the ministry of home affairs. The Tidal upsurge had affected 250 kilometers of the Kerala coastline and entered between one or two kilometers inland. Pounded 187 villages affecting 24. 70 lakh persons in the state . As many as 6,280 dwelling units were destroyed. As many as 84,773 persons wee evacuated from the coastal areas and accommodated

Ch 2 Solution

CHAPTER 2 Mechanics of Futures Markets Practice Questions Problem 2. 8. The party with a short position in a futures contract sometimes has options as to the precise asset that will be delivered, where delivery will take place, when delivery will take place, and so on. Do these options increase or decrease the futures price? Explain your reasoning. These options make the contract less attractive to the party with the long position and more attractive to the party with the short position. They therefore tend to reduce the futures price. Problem 2. 9. What are the most important aspects of the design of a new futures contract?The most important aspects of the design of a new futures contract are the specification of the underlying asset, the size of the contract, the delivery arrangements, and the delivery months. Problem 2. 10. Explain how margins protect investors against the possibility of default. A margin is a sum of money deposited by an investor with his or her broker. It acts a s a guarantee that the investor can cover any losses on the futures contract. The balance in the margin account is adjusted daily to reflect gains and losses on the futures contract. If losses are above a certain level, the investor is required to deposit a further margin.This system makes it unlikely that the investor will default. A similar system of margins makes it unlikely that the investor’s broker will default on the contract it has with the clearinghouse member and unlikely that the clearinghouse member will default with the clearinghouse. Problem 2. 11. A trader buys two July futures contracts on frozen orange juice. Each contract is for the delivery of 15,000 pounds. The current futures price is 160 cents per pound, the initial margin is $6,000 per contract, and the maintenance margin is $4,500 per contract. What price change would lead to a margin call?Under what circumstances could $2,000 be withdrawn from the margin account? There is a margin call if more than $1 ,500 is lost on one contract. This happens if the futures price of frozen orange juice falls by more than 10 cents to below 150 cents per lb. $2,000 can be withdrawn from the margin account if there is a gain on one contract of $1,000. This will happen if the futures price rises by 6. 67 cents to 166. 67 cents per lb. Problem 2. 12. Show that, if the futures price of a commodity is greater than the spot price during the delivery period, then there is an arbitrage opportunity.Does an arbitrage opportunity exist if the futures price is less than the spot price? Explain your answer. If the futures price is greater than the spot price during the delivery period, an arbitrageur buys the asset, shorts a futures contract, and makes delivery for an immediate profit. If the futures price is less than the spot price during the delivery period, there is no similar perfect arbitrage strategy. An arbitrageur can take a long futures position but cannot force immediate delivery of the asset. The d ecision on when delivery will be made is made by the party with the short position.Nevertheless companies interested in acquiring the asset will find it attractive to enter into a long futures contract and wait for delivery to be made. Problem 2. 13. Explain the difference between a market-if-touched order and a stop order. A market-if-touched order is executed at the best available price after a trade occurs at a specified price or at a price more favorable than the specified price. A stop order is executed at the best available price after there is a bid or offer at the specified price or at a price less favorable than the specified price. Problem 2. 14. Explain what a stop-limit order to sell at 20. 0 with a limit of 20. 10 means. A stop-limit order to sell at 20. 30 with a limit of 20. 10 means that as soon as there is a bid at 20. 30 the contract should be sold providing this can be done at 20. 10 or a higher price. Problem 2. 15. At the end of one day a clearinghouse member is long 100 contracts, and the settlement price is $50,000 per contract. The original margin is $2,000 per contract. On the following day the member becomes responsible for clearing an additional 20 long contracts, entered into at a price of $51,000 per contract. The settlement price at the end of this day is $50,200.How much does the member have to add to its margin account with the exchange clearinghouse? The clearinghouse member is required to provide 20 ? $2, 000 = $40, 000 as initial margin for the new contracts. There is a gain of (50,200 ? 50,000) ? 100 = $20,000 on the existing contracts. There is also a loss of (51, 000 ? 50, 200) ? 20 = $16, 000 on the new contracts. The member must therefore add 40, 000 ? 20, 000 + 16, 000 = $36, 000 to the margin account. Problem 2. 16. On July 1, 2010, a Japanese company enters into a forward contract to buy $1 million with yen on January 1, 2011.On September 1, 2010, it enters into a forward contract to sell $1 million on January 1, 2011 . Describe the profit or loss the company will make in dollars as a function of the forward exchange rates on July 1, 2010 and September 1, 2010. Suppose F1 and F2 are the forward exchange rates for the contracts entered into July 1, 2010 and September 1, 2010, and S is the spot rate on January 1, 2011. (All exchange rates are measured as yen per dollar). The payoff from the first contract is (S ? F1 ) million yen and the payoff from the second contract is (F2 ? S ) million yen.The total payoff is therefore ( S ? F1 ) + ( F2 ? S ) = ( F2 ? F1 ) million yen. Problem 2. 17. The forward price on the Swiss franc for delivery in 45 days is quoted as 1. 1000. The futures price for a contract that will be delivered in 45 days is 0. 9000. Explain these two quotes. Which is more favorable for an investor wanting to sell Swiss francs? The 1. 1000 forward quote is the number of Swiss francs per dollar. The 0. 9000 futures quote is the number of dollars per Swiss franc. When quoted in the same way as the futures price the forward price is 1 / 1. 1000 = 0. 091 . The Swiss franc is therefore more valuable in the forward market than in the futures market. The forward market is therefore more attractive for an investor wanting to sell Swiss francs. Problem 2. 18. Suppose you call your broker and issue instructions to sell one July hogs contract. Describe what happens. Hog futures are traded on the Chicago Mercantile Exchange. (See Table 2. 2). The broker will request some initial margin. The order will be relayed by telephone to your broker’s trading desk on the floor of the exchange (or to the trading desk of another broker).It will be sent by messenger to a commission broker who will execute the trade according to your instructions. Confirmation of the trade eventually reaches you. If there are adverse movements in the futures price your broker may contact you to request additional margin. Problem 2. 19. â€Å"Speculation in futures markets is pure gambling. It is n ot in the public interest to allow speculators to trade on a futures exchange. † Discuss this viewpoint. Speculators are important market participants because they add liquidity to the market.However, contracts must be useful for hedging as well as speculation. This is because regulators generally only approve contracts when they are likely to be of interest to hedgers as well as speculators. Problem 2. 20. Identify the three commodities whose futures contracts in Table 2. 2 have the highest open interest. Based on the contract months listed, the answer is crude oil, corn, and sugar (world). Problem 2. 21. What do you think would happen if an exchange started trading a contract in which the quality of the underlying asset was incompletely specified?The contract would not be a success. Parties with short positions would hold their contracts until delivery and then deliver the cheapest form of the asset. This might well be viewed by the party with the long position as garbage! O nce news of the quality problem became widely known no one would be prepared to buy the contract. This shows that futures contracts are feasible only when there are rigorous standards within an industry for defining the quality of the asset. Many futures contracts have in practice failed because of the problem of defining quality.Problem 2. 22. â€Å"When a futures contract is traded on the floor of the exchange, it may be the case that the open interest increases by one, stays the same, or decreases by one. † Explain this statement. If both sides of the transaction are entering into a new contract, the open interest increases by one. If both sides of the transaction are closing out existing positions, the open interest decreases by one. If one party is entering into a new contract while the other party is closing out an existing position, the open interest stays the same. Problem 2. 23.Suppose that on October 24, 2010, you take a short position in an April 2011 live-cattle f utures contract. You close out your position on January 21, 2011. The futures price (per pound) is 91. 20 cents when you enter into the contract, 88. 30 cents when you close out your position, and 88. 80 cents at the end of December 2010. One contract is for the delivery of 40,000 pounds of cattle. What is your total profit? How is it taxed if you are (a) a hedger and (b) a speculator? Assume that you have a December 31 year end. The total profit is 40, 000 ? (0. 9120 ? 0. 8830) = $1,160 If you are a hedger this is all taxed in 2011.If you are a speculator 40, 000 ? (0. 9120 ? 0. 8880) = $960 is taxed in 2010 and 40, 000 ? (0. 8880 ? 0. 8830) = $200 is taxed in 2011. Further Questions Problem 2. 24 Trader A enters into futures contracts to buy 1 million euros for 1. 4 million dollars in three months. Trader B enters in a forward contract to do the same thing. The exchange (dollars per euro) declines sharply during the first two months and then increases for the third month to close at 1. 4300. Ignoring daily settlement, what is the total profit of each trader? When the impact of daily settlement is taken into account, which trader does better?The total profit of each trader in dollars is 0. 03? 1,000,000 = 30,000. Trader B’s profit is realized at the end of the three months. Trader A’s profit is realized day-by-day during the three months. Substantial losses are made during the first two months and profits are made during the final month. It is likely that Trader B has done better because Trader A had to finance its losses during the first two months. Problem 2. 25 Explain what is meant by open interest. Why does the open interest usually decline during the month preceding the delivery month?On a particular day there are 2,000 trades in a particular futures contract. Of the 2,000 traders on the long side of the market, 1,400 were closing out position and 600 were entering into new positions. Of the 2,000 traders on the short side of the market, 1 ,200 were closing out position and 800 were entering into new positions. What is the impact of the day's trading on open interest? Open interest is the number of contract outstanding. Many traders close out their positions just before the delivery month is reached. This is why the open interest declines during the month preceding the delivery month.The open interest went down by 600. We can see this in two ways. First, 1,400 shorts closed out and there were 800 new shorts. Second, 1,200 longs closed out and there were 600 new longs. Problem 2. 26 One orange juice future contract is on 15,000 pounds of frozen concentrate. Suppose that in September 2009 a company sells a March 2011 orange juice futures contract for 120 cents per pound. In December 2009 the futures price is 140 cents. In December 2010 the futures price is 110 cents. In February 2011 the futures price is 125 cents. The company has a December year end.What is the company's profit or loss on the contract? How is it realiz ed? What is the accounting and tax treatment of the transaction is the company is classified as a) a hedger and b) a speculator? The price goes up during the time the company holds the contract from 120 to 125 cents per pound. Overall the company therefore takes a loss of 15,000? 0. 05 = $750. If the company is classified as a hedger this loss is realized in 2011, If it is classified as a speculator it realizes a loss of 15,000? 0. 20 = $3000 in 2009, a gain of 15,000? 0. 30 = $4,500 in 2010 and a loss of 15,000? 0. 5 = $2,250 in 2011. Problem 2. 27. A company enters into a short futures contract to sell 5,000 bushels of wheat for 250 cents per bushel. The initial margin is $3,000 and the maintenance margin is $2,000. What price change would lead to a margin call? Under what circumstances could $1,500 be withdrawn from the margin account? There is a margin call if $1000 is lost on the contract. This will happen if the price of wheat futures rises by 20 cents from 250 cents to 270 ce nts per bushel. $1500 can be withdrawn if the futures price falls by 30 cents to 220 cents per bushel. Problem 2. 28.Suppose that there are no storage costs for crude oil and the interest rate for borrowing or lending is 5% per annum. How could you make money on August 4, 2009 by trading December 2009 and June 2010 contracts on crude oil? Use Table 2. 2. The December 2009 settlement price for oil is $75. 62 per barrel. The June 2010 settlement price for oil is $79. 41 per barrel. You could go long one December 2009 oil contract and short one June 2010 contract. In December 2009 you take delivery of the oil borrowing $75. 62 per barrel at 5% to meet cash outflows. The interest accumulated in six months is about 75. 2? 0. 05? 0. 5 or $1. 89. In December the oil is sold for $79. 41 per barrel which is more than the amount that has to be repaid on the loan. The strategy therefore leads to a profit. Note that this profit is independent of the actual price of oil in June 2010 or December 2009. It will be slightly affected by the daily settlement procedures. Problem 2. 29. What position is equivalent to a long forward contract to buy an asset at K on a certain date and a put option to sell it for K on that date? The equivalent position is a long position in a call with strike price K . Problem 2. 30. Excel file) The author’s Web page (www. rotman. utoronto. ca/~hull/data) contains daily closing prices for the December 2001 crude oil futures contract and the December 2001 gold futures contract. (Both contracts are traded on NYMEX. ) You are required to download the data and answer the following: a) How high do the maintenance margin levels for oil and gold have to be set so that there is a 1% chance that an investor with a balance slightly above the maintenance margin level on a particular day has a negative balance two days later (i. e. one day after a margin call). How high do they have to be for a 0. 1% chance.Assume daily price changes are normally distribu ted with mean zero. b) Imagine an investor who starts with a long position in the oil contract at the beginning of the period covered by the data and keeps the contract for the whole of the period of time covered by the data. Margin balances in excess of the initial margin are withdrawn. Use the maintenance margin you calculated in part (a) for a 1% risk level and assume that the maintenance margin is 75% of the initial margin. Calculate the number of margin calls and the number of times the investor has a negative margin balance and therefore an incentive to walk away.Assume that all margin calls are met in your calculations. Repeat the calculations for an investor who starts with a short position in the gold contract. The data for this problem in the 7th edition is different from that in the 6th edition. a) For gold the standard deviation of daily changes is $15. 184 per ounce or $1518. 4 per contract. For a 1% risk this means that the maintenance margin should be set at 1518 . 4 ? 2 ? 2. 3263 or 4996 when rounded. For a 0. 1% risk the maintenance margin should be set at 1518 . 4 ? 2 ? 3. 0902 or 6636 when rounded. For crude oil the standard deviation of daily changes is $1. 777 per barrel or $1577. 7 per contract. For a 1% risk, this means that the maintenance margin should be set at 1577 . 7 ? 2 ? 2. 3263 or 5191 when rounded. For a 0. 1% chance the maintenance margin should be set at 1577 . 7 ? 2 ? 3. 0902 or 6895 when rounded. NYMEX might be interested in these calculations because they indicate the chance of a trader who is just above the maintenance margin level at the beginning of the period having a negative margin level before funds have to be submitted to the broker. b) For a 1% risk the initial margin is set at 6,921 for on crude oil. This is the maintenance margin of 5,191 divided by 0. 75. ) As the spreadsheet shows, for a long investor in oil there are 157 margin calls and 9 times (out of 1039 days) where the investor is tempted to walk away. F or a 1% risk the initial margin is set at 6,661 for gold. (This is 4,996 divided by 0. 75. ) As the spreadsheet shows, for a short investor in gold there are 81 margin calls and 4 times (out of 459 days) when the investor is tempted to walk away. When the 0. 1% risk level is used there is 1 time when the oil investor might walk away and 2 times when the gold investor might do so.

Quines pueden ajustar su estatus y sacar green card

Quines pueden ajustar su estatus y sacar green card El  ajuste de estatus  es un trmite migratorio muy ventajoso que permite a una persona que se encuentra ya en Estados Unidos sacar la tarjeta de residencia permanente (green card) sin necesidad de salir del paà ­s. Lamentablemente no todos los migrantes pueden solicitarlo. Por la importancia del ajuste migratorio, tambià ©n conocido por sus siglas en inglà ©s de AOS, en este artà ­culo se explican cules son sus ventajas, quià ©nes pueden solicitarlo, cà ³mo se tramita la solicitud y cul es la alternativa para los casos en los que no es posible. Ventajas de sacar la green card por ajuste de estatus El AOS brinda dos grandes beneficios: Evita los costes de viajar fuera de Estados Unidos para completar la tramitacià ³n de una solicitud de green card.Y, sobre todo, evita que aplique el castigo de los 3 y de los 10 aà ±os. Es importante tener en consideracià ³n que esta penalidad sà ³lo aplica a las personas que se encuentran fuera de Estados Unidos y desean regresar con una visa de inmigrante o una de no inmigrante. Migrantes que pueden pedir ajuste de estatus por familia o trabajo Pueden hacerlo los migrantes que se encuentran en alguna de las siguientes categorà ­as: Los familiares inmediatos de un ciudadano americano: esposo, mujer, padres, madres e hijos menores solteros de 21 aà ±os si estn legalmente en USA o si, estando ilegalmente, su ingreso fue legal y ahora estn ilegales porque se quedaron en el paà ­s ms all del plazo autorizado de estadà ­a. Sin embargo, no se puede solicitar  si han ingresado al paà ­s ilegalmente sin pasar por un control de inmigracià ³n en una aduana.  Esto es muy importante porque impide sacar la green card sin salir de Estados Unidos a cà ³nyuges, hijos solteros menores de 21 aà ±os y padres de ciudadanos americanos que llegaron al paà ­s cruzando ilegalmente la frontera. En este caso hay excepciones limitadas, como el caso de familiares de militares por aplicacià ³n del programa Parole in Place (PIP). Por otra parte, los hijos casados, los hijos solteros mayores de 21 aà ±os y los hermanos de ciudadanos americanos y los cà ³nyuges e hijos de cualquier edad de residentes permanentes sà ³lo pueden ajustar su estatus en USA si estn legalmente en el paà ­s, y debido a los tiempos de demora sà ³lo en casos excepcionales ser posible. Finalmente, los  prometidos de  ciudadanos americanos y los hijos de aquellos que hayan entrado a Estados Unidos con visas K-1 y K-2 respectivamente. Se requiere que el matrimonio se contraiga en los 90 dà ­as siguientes a haber ingresado al paà ­s. Es muy importante tener en cuenta que la boda se tiene que celebrar entre la persona pedida y el que la pide. No se puede cambiar de novio/a. Otro ejemplo de posibilidad de sacar la green card por ajuste de estatus tiene lugar cuando empresas y otras instituciones americanas como por ejemplo ONGs o universidades solicitar tarjetas de residencia para trabajadores y profesionales extranjeros. Si la peticià ³n es aprobada se proceder a solicitar su ajuste de estatus, siempre y cuando està ©n en el paà ­s legalmente. En otras palabras, ninguna empresa puede patrocinar una green card por razones de trabajo a un migrante que est en Estados Unidos con estatus de indocumentado, tanto si esa situacià ³n es porque entrà ³ ilegalmente o porque no salià ³ a tiempo del paà ­s. Ajuste de estatus con carcter derivado En ciertos casos se permite que cuando se tramita un ajuste de estatus para una persona que se pueda extender la peticià ³n a su cà ³nyuge e hijos solteros menores de 21 aà ±os.   Asilo polà ­tico, refugiados y ajuste de estatus Las personas a las que se le ha aprobado la condicià ³n de asilado  podrn al cumplir el aà ±o a contar desde esa fecha solicitar por sà ­ mismas el ajuste de estatus. Es necesario que se cumplan los siguientes requisitos: Presencia fà ­sica en Estados Unidos por al menos 365 dà ­as tras la concesià ³n de la condicià ³n de asilado.Y que las circunstancias por las que se le concedià ³ la solicitud de asilo no hayan cambiado.Podrn, asimismo, solicitar el ajuste sus cà ³nyuges e hijos solteros menores de 21 aà ±os. Asimismo, podrn solicitar este beneficio migratorio tras residir en Estados Unidos por un aà ±o tras haber ingresado al paà ­s como refugiados. Cubanos y su rà ©gimen migratorio especial Para las personas con pasaporte cubano aplica la ley conocida de Ajuste Cubano. Pero tener en cuenta que ya no est en aplicacià ³n la polà ­tica de  pies secos, pies mojados. Con Ajuste Cubano se puede solicitar el ajuste de estatus tras pasar un aà ±o y un dà ­a viviendo en Estados Unidos pero se tiene que haber ingresado legalmente. Los cà ³nyuges y los hijos solteros de cualquier edad de un cubano pero que tengan otra nacionalidad podrn tambià ©n pedir el ajuste de estatus tras pasar 365 dà ­as en Estados Unidos si ingresaron legalmente. Ajuste de estatus por residencia continuada en Estados Unidos Los extranjeros que han  vivido en Estados Unidos de manera continua desde el 1 de enero de 1972 y pueden demostrarlo podrn solicitar un ajuste de estatus. Es lo que se conoce como residencia por el registry. Casos humanitarios y ajuste de estatus Tambià ©n pueden solicitar el ajuste de estatus los migrantes que han recibido una visa U por và ­ctima de violencia o una visa T por trfico humano si han vivido en los Estados Unidos por al menos por 3 aà ±os desde que recibieron esa visa. En el caso de và ­ctimas de violencia domà ©stica que se han regularizado mediante el programa VAWA y tienen una peticià ³n I-360 aprobada, pueden pedir el ajuste de estatus inmediatamente si son cà ³nyuges de ciudadanos. Por el contrario, si son cà ³nyuges de residentes deben esperar que llegue su fecha de prioridad. Esta puede ser la del I-360 o, si su cà ³nyuge les habà ­a pedido previamente, la del I-130. Decisià ³n judicial En casos de deportacià ³n un juez de inmigracià ³n puede decidir conceder un ajuste de estatus a un inmigrante extranjero. Esta es una de las formas de alivio con las que se puede luchar frente a la deportacià ³n. Casos especiales de menores migrantes En ocasiones, una corte americana puede decidir que un menor extranjero no puede vivir con sus padres por razones de abuso, negligencia o abandono y establece que es en interà ©s del muchacho permanecer en Estados Unidos. Estos casos se conocen como inmigrantes juveniles especiales (SIJ, siglas en inglà ©s) y se permite que estos menores soliciten un ajuste de estatus para sà ­ mismos. Casos especiales de inmigrantes militares Siempre en los tà ©rminos que disponga la ley, los extranjeros que colaboren con los Ejà ©rcitos americanos podrn, en ciertas circunstancias, solicitar un ajuste de estatus. En estos momentos se concede este beneficio a traductores e intà ©rpretes afganos e iraquà ­es. Beneficios sociales para las personas tramitando un ajuste de estatus En algunos estados las personas en trmites para ajustar su estatus son consideradas PRUCOL y se les reconoce algunos beneficios sociales. Los requisitos varà ­an segà ºn el estado y segà ºn el tipo de beneficio. Cà ³mo se pide el ajuste de estatus La planilla a llenar es la I-485. Hay que enviarla debidamente cumplimentada, con el pago de la tarifa y documentacià ³n adicional necesaria. En cuanto al momento, depende del caso. Por ejemplo, si se trata de familiares inmediatos (cà ³nyuges, hijos solteros menores de 21 aà ±os y padres) de ciudadanos americanos se puede enviar junto con la peticià ³n cuando se llena el I-130. Pero en los casos en los que existe un tope anual por categorà ­a hay que esperar a lo que se conoce como fecha al corriente. Para eso hay que consultar todos los meses el boletà ­n de visas. Viajar con peticià ³n pendiente y quà © hacer con retrasos y negaciones Es posible que el USCIS no apruebe la solicitud de ajuste de estatus. En estos casos, chequea si puedes apelar su decisià ³n. Asimismo, si se retrasa en dar una respuesta ms all de lo que es habitual para este tipo de trmite, consultar con un abogado si procede demandar mediante un writ of mandamus. Tambià ©n es muy importante tener en cuenta que si se inicia un proceso de ajuste de estatus no se debe salir de Estados Unidos sin pedir previamente una autorizacià ³n conocida como advance parole. El procedimiento consular como opcià ³n al ajuste de estatus Cuando  no se pueda ajustar el estatus  la opcià ³n es salir de Estados Unidos e ir a travà ©s de lo que se conoce procedimiento consular. El gran problema con esto surge cuando se ha estado ilegalmente en los Estados Unidos por ms de 180 dà ­as porque aplica el castigo de los 3 y de los 10 aà ±os, si bien hay casos de excepciones. Es cierto que en algunos casos es posible solicitar un perdà ³n, tambià ©n conocido como waiver o permiso. Pero las estadà ­sticas muestran que no es fcil obtenerlo. Por esta razà ³n es muy importante conocer cules son las opciones para el caso de cada uno y si hay un riesgo real de quedarse fuera de Estados Unidos por muchos aà ±os.